SMOANT Taggerz 200W Starter Kit

SMOANT Taggerz 200W Starter Kit

SMOANT presents a unique Vape Box Mod called Taggerz; constructed with plastic molding and finished with surface paint, this device weighs as light as a feather without any batteries installed. Paired with the Taggerz Vape Mod is the Taggerz disposable vape tank, this disposable tank comes as simple as can be. With only silicone stopper covering the juice port, filling this Tank is as easy as pie. Don't be fooled, the SMOANT Taggerz can also utilize various rebuildables and sub-ohm tanks in the market. Paired together or completely separate, pure satisfaction is all you will get.

Delving deeper into the Box Mod, the Taggerz is more than meets the eye. With a large format 0.96 inch OLED display, users can clearly view essential vaping data measured in the form of wattage, atomizer resistance, voltage range, working mode, battery life, and more. Both adjustment buttons are located a bit farther from the screen, angling down towards the base of the mod. Behind all of this interface, a removable magnetic battery can be found and houses dual high amperage 18650 batteries (sold separately). The Taggerz can be charged via micro USB port (located on the face of the device) and charges batteries in union due to the proprietary chip. This chipset allows the Taggerz to have a wattage output of 1 to 200W with an atomizer resistance range of 0.05 to 3.0 ohm, perfect for any Sub-Ohm Tanks or Rebuildables. As an added customization, users can enter a mode called DVW; This mode allows for users to set a wattage output curve that is dependent on the puff time. A full temperature control suite is also available for those who use unique wires. 

Included in the Starter Kit is the Taggerz Disposable Sub-Ohm Tank. This Sub-Ohm Tank, as the name goes, is completely disposable. A single silicone tab is present on this Tank to serve as the fill port cover; A single pull is the only requirement to fill this device with up to 2ml of E-Liquid. Located on the bottom are dual airflow slots measuring at 9mm by 2mm, each adjustable with the airflow control ring. Internally, the Taggerz Disposable Coil Head measures at 0.2 ohm and recommended to be used at 40 to 45W.

Don't let this devices' look fool you, it is a capable vape mod that has plenty of room for potential. The Taggerz Box Mod and Sub-Ohm Tank is a unique take on vape construction and takes the cake for being light.

Mod Specifications

• Proprietary Chipset
  
  • 1 to 200W Output
    • 0.05 to 3.0 ohm Atomizer Resistance Range
  • 6.0 to 8.4V Output
  • Variable Wattage Curves (DVW Mode)
  • TC/TCR Curve
  • Temperature Control Suite
    • Ni200 Nickel Support
    • Titanium Support
    • SS316 Support
    • TCR Mode
    • 200 to 600 Degrees Fahrenheit
    • 0.05 to 1.0 ohm Atomizer Resistance Range
• Magnetic Battery Bay Access
  • Dual 18650 Battery Powered (sold separately)
• 0.96 Inch OLED Display
  • Output Mode
  • Output Temperature
  • Output Wattage
  • Output Voltage
  • Material and Mode Selection
  • Atomizer Resistance
  • Output Current
  • Vape Time Counter
  • Battery Life Indicator
• Triple Control Interface
  • Enlarged Firing Button
  • Dual Adjustment Buttons
• Micro USB Charging Port
  • 1.5A Charging
• Spring Loaded Gold Plated 510 Connection
• Reverse Protection/ Over-Heating Protection/ Low Voltage Protection/ Short-Circuit Protection/ 10s Over-Time Protection

• 90mm by 51mm by 31.5mm

Atomizer Specifications

• 22mm Diameter
  • 36mm Tall
• Silicone Pull Out Tab Fill Design
  • 2ml E-Liquid Capacity
• 0.2 ohm Coil Head
• Best at 40 to 45W
• Dual Adjustable Bottom Airflow
  • 9mm by 2mm Airflow Slots
  • Fully Adjustable
• 8mm Wide Bore Drip Tip
  • 9mm Tall
• Fully Disposable 

Product Includes

• One Smoant Taggerz Box Mod
• One Smoant Taggerz Disposable Sub-Ohm Tank
• One Extra Silicone Stopper
• One Micro USB Cable
• User Manual
• One Warranty Card