Innokin Endura T18 II Starter Kit

Innokin Endura T18 II Starter Kit

The Endura T18 II by Innokin is a compact Pen-Style starter kit that features a built in 1300 mAh battery and three output wattages to choose from. The Endura T18 II has a maximum output of 14W and a maximum voltage output of 3.5V. The Wattage output of the Endura T18 II can be changed while the device is off-- Simply hold the oversized firing button until the LED light cycles. The first LED Light is 10.5W, the center LED light is 12W, and finally the last LED light is 13.5W. The Endura T18 II has a maximum battery capacity of 1300 mAh and can be charged via USB port and displays a battery life indicator. The Battery Life indicator can be viewed after firing the device, three dots means the battery is full, two dots means the battery is halfway done, and one dot means the battery is low. The Endura T18 II Tank features a 2.5ml juice capacity, threaded top cap system, and a magnetic cap to prevent any dirt or lint to go in the drip tip. The Endura T18 II's airflow travels down the 510 adapter onto the airflow control ring located above the oversized fire button. The Airflow of the Endura can be fully adjusted through four airflow slots. Juice enters the Endura T18 II via threaded top cap and can accommodate 2.5ml of your favorite E-Liquid. The Endura T18 II utilizes a 1.5 ohm Coil ensuring that Vapors get as much flavor as they can. The Endura T18 II Starter Kit by Innokin is a great Pen-style starter kit that boasts tremendous flavor for a petite size.

Mod Specifications

• 1300 mAh High Efficiency Integrated Battery
  • 14W Maximum Output
  • 3.5V Maximum Voltage Output
  • Triple Wattage Settings
    • Hold Oversized Firing Button While Device Is Off
      
      • First LED From the Left
        
        • 10.5W
      • Center LED
        
        • 12W
      • Last LED to the Right
        
        • 13.5W
• Single Button Control Face
  • Oversized Firing Button
  • Battery Life LED Indicator
    • Three Dots
      • Full
    • Two Dots
      • Half
    • One Dot
      • Recharge
• Magnetic Cap
• Standard 510 Threading
• Low Voltage Protection/Short Circuit Protection/Low Resistance Protection

Atomizer Specifications

• 18mm Diameter
• Threaded Top Fill System
• 2.5ml Tank Capacity
• Prism Technology
  • Superior Flavor Recreation
    • 1.5 Ohm Coil
    • Organic Cotton
• 510 Pin Acts as Airflow Channel
  • Airflow Control Ring Located on the Mod
    • Four Airflow Slots
      • 1mm
      • 0.75mm
      • 0.50mm
      • 0.25mm
• 5mm Bore Delrin Drip Tip

Product Includes

• Endura T18 II 13500mAh Mod
• Prism T18 IIs Sub-Ohm Tank
  • Two Prism 1.5 ohm Coil
• One Extra Integrated Threaded Top Cap Drip Tip
• One Charging Cable
• One Quick Start Guide